Use this instruction guide to help setup on match day.
INITIAL SETUP
Extend the tripod legs to their maximum width and tighten the screws to secure them in place.
Open the waterproof carry case.
Make sure the camera SD card is inside the camera, underneath the unit.
Connect the camera to the tripod head
Attach the tripod head to the top of the tripod by screwing it in securely.
Connect both the ethernet and DC of one end of the long cable to the camera and the other end to external ports on the waterproof case.
Ensure the long cable is untangled and let it fall down the side of the tripod mast.
Adjust the tripod head to an angle you feel will be suitable.
POWER AND CONNECTION SETUP
Leave the battery inside the foam inserts of the case.
Flick the switch on the battery, and the indicator lights will illuminate, indicating the remaining battery life.
Plug the internal ethernet case connector into the ethernet port of the Stream Machine.
Plug the DC case connector cable coming from the internal case connector into the input/output 12/13v port on the battery.
Plug the power cable into the 12v/3A port on the battery into the Stream Machine.
Raise the camera mast gradually by extending one section at a time, starting from the top section. We recommend going as high, but as safely possible. Refer to the mast setup guide for more information.
VIEWING SETUP
On your mobile device, install the Camera-Pan PWA app if you do not already have it.
Connect your mobile device to the WiFi and connect to the Stream Machine. If you need help doing this follow the Connecting to the Stream Machine guide.
Click Live Capture on the home screen.
Click Check View
Click the try again button to generate a picture of the camera's view.
ADJUSTMENTS AND FINAL SETUP
Look at the picture on your mobile device and adjust the camera angle as needed to ensure optimal viewing of the match. If needed lower the tripod again and adjust the ball head.
Ensure all screws are tightened before leaving the tripod.
Follow the Live Capture guide next to learn how to start a stream or live recording.